TDP lamp Questions

Home  > FAQ  > Questions  > TDP lamp Questions  > 

TDP lamp operator or user must inspect

TDP lamp operator or user must inspect


The operator or user must inspect the device as follows:

1) Inspection before power on

    If the device extrinsic feature in good condition;


The power voltage must in accord with the rated value of the device, prohibition of use if disaccord;

    Disagree for use in severe humid environment, such as bathroom;

    After the above check correctly, set up the power to do further inspection.


2) Power check

    Insert the instrument power cord into the power outlet, the yellow power indicator light is on;

    Press the "on / off" button, the instrument began to heat;

    During the power, the instrument should be no exception;

    After checking, unplug the power cord, the yellow power indicator is off;

    After the above check correct, before use